semiconductor features plastic package glass passivated junction 5000w peak pulse power capability with a 10/1000s waveform excellent clamping capability low incremental surge resistance fast response time: typically less than 1.0ps from 0 volts to bv typical i r less than 10m a for v (br) ?y10v high temperature soldering guaranteed:265 / 10 seconds, 0.375"(9.5mm) lead length, 5 lbs. (2.3kg) tension mechanical data case:jedec r-6, molded plastic polarity: color band denotes positive end (cathode) except bipola weight: 0.07ounce, 2.1gram mounting position: any maximum instantaneous forward voltage at 25a for unidirectional only (note 4) i fsm 400 3.5 operating junction and storage temperature range t j , t stg -55---+175 ( 3 ) 8.3ms sin g le half sine-wave , or e q uivalent s q uare wave, dut y c y cle = 4 p ulses p er minutes maximum. ( 2 ) mounted on co pp er pad area of 0.80.8" ( 2020mm ) p er fi g . 5. notes: ( 1 ) non-repetitive current pules, per fi g . 3 and derated above t a =25 ?? per fig. 2 steady state power dissipation at t l =75 ffffflead lengths 0.375"(9.5mm) (note 2) p m(av) 8.0 w a v v f peak forward surge current, 8.3ms single half ffffsine-wave superimposed on rated load (jedec method) (note 3) peak pulse current with a 10/1000s waveform (note 1) i ppm see table 1 a peak power dissipation with a 10/1000s waveform (note 1, fig.1) p ppm minimum 5000 w 5KP---series transient voltage suppressor breakdown voltage: 5.0 - 220 v peak pulse power: 5000 w r-6 devices for bidirectional applications for bidirectional use c or ca suffix for types 5KP5.0 thru types 5KP220 (e.g. 5KP5.0c , 5KP220ca) electrical characteristics apply in both directions unit value symbol maximum ratings and characteristics ratings at 25 ambient temperature unless otherwise specified. ki semiconductor document number 0285004 1. ki
min max 5KP5.0 6.40 7.30 50 5.0 2000 521 9.6 0.057 5KP5.0a 6.40 7.00 50 5.0 2000 543 9.2 0.057 5KP6.0 6.67 8.15 50 6.0 5000 439 11.4 0.061 5KP6.0a 6.67 7.37 50 6.0 5000 485 10.3 0.061 5KP6.5 7.22 8.8 50 6.5 2000 407 12.3 0.065 5KP6.5a 7.22 7.98 50 6.5 2000 446 11.2 0.065 5KP7.0 7.78 9.51 50 7.0 1000 376 13.3 0.068 5KP7.0a 7.78 8.60 50 7.0 1000 417 12.0 0.068 5KP7.5 8.33 10.2 5.0 7.5 250 350 14.3 0.073 5KP7.5a 8.33 9.21 5.0 7.5 250 388 12.9 0.073 5KP8.0 8.89 10.9 5.0 8.0 150 333 15.0 0.075 5KP8.0a 8.89 9.83 5.0 8.0 150 368 13.6 0.075 5KP8.5 9.44 11.5 5.0 8.5 50.0 314 15.9 0.078 5KP8.5a 9.44 10.4 5.0 8.5 50.0 347 14.4 0.078 5KP9.0 10.0 12.2 5.0 9.0 20.0 296 16.9 0.081 5KP9.0a 10.0 11.1 5.0 9.0 20.0 325 15.4 0.081 5KP10 11.1 13.6 5.0 10.0 15.0 266 18.8 0.084 5KP10a 11.1 12.3 5.0 10.0 15.0 294 17.0 0.084 5KP11 12.2 14.9 5.0 11.0 10.0 249 20.1 0.086 5KP11a 12.2 13.5 5.0 11.0 10.0 275 18.2 0.086 5KP12 13.3 16.3 5.0 12.0 10.0 227 22.0 0.088 5KP12a 13.3 14.7 5.0 12.0 10.0 251 19.9 0.088 5KP13 14.4 17.6 5.0 13.0 10.0 210 23.8 0.090 5KP13a 14.4 15.9 5.0 13.0 10.0 233 21.5 0.090 5KP14 15.6 19.1 5.0 14.0 10.0 194 25.8 0.092 5KP14a 15.6 17.2 5.0 14.0 10.0 216 23.2 0.092 5KP15 16.7 20.4 5.0 15.0 10.0 186 26.9 0.094 5KP15a 16.7 18.5 5.0 15.0 10.0 205 24.4 0.094 5KP16 17.8 21.8 5.0 16.0 10.0 174 28.8 0.096 5KP16a 17.8 19.7 5.0 16.0 10.0 192 26.0 0.096 5KP17 18.9 23.1 5.0 17.0 10.0 164 30.5 0.097 5KP17a 18.9 20.9 5.0 17.0 10.0 181 27.6 0.097 5KP18 20.0 24.4 5.0 18.0 10.0 155 32.2 0.098 5KP18a 20.0 22.1 5.0 18.0 10.0 171 29.2 0.098 5KP20 22.2 27.1 5.0 20.0 10.0 140 35.8 0.099 5KP20a 22.2 24.5 5.0 20.0 10.0 154 32.4 0.099 5KP22 24.4 29.8 5.0 22.0 10.0 127 39.4 0.100 5KP22a 24.4 26.9 5.0 22.0 10.0 141 35.5 0.100 5KP24 26.7 32.6 5.0 24.0 10.0 116 43.0 0.101 5KP24a 26.7 29.5 5.0 24.0 10.0 129 38.9 0.101 5KP26 28.9 35.3 5.0 26.0 10.0 107 46.6 0.101 5KP26a 28.9 31.9 5.0 26.0 10.0 119 42.1 0.101 5KP28 31.1 38.0 5.0 28.0 10.0 100 50.1 0.102 5KP28a 31.1 34.4 5.0 28.0 10.0 110 45.4 0.102 5KP30 33.3 40.7 5.0 30.0 10.0 93.5 53.5 0.103 5KP30a 33.3 36.8 5.0 30.0 10.0 103 48.4 0.103 5KP33 36.7 44.9 5.0 33.0 10.0 84.7 59.0 0.104 5KP33a 36.7 40.6 5.0 33.0 10.0 93.8 53.3 0.104 5KP36 40.0 48.9 5.0 36.0 10.0 77.8 64.3 0.104 5KP36a 40.0 44.2 5.0 36.0 10.0 86.1 58.1 0.104 5KP40 44.4 54.3 5.0 40.0 10.0 70.0 71.4 0.105 5KP40a 44.4 49.1 5.0 40.0 10.0 77.5 64.5 0.105 maximum reverse leakge at v wm i d (a) maximum pead pulse i ppm (a) maximum clamping voltage at i ppm v c (v) maximum temperature coefficient of v (br) (%/ ??) breakdown voltage v (br) (v) test current at i t (ma) stand-off voltage v wm (v) electrical characteristics at(t a =25 ?? unless otherwise noted) table 1 device type document number 0285004 2. kisemiconductor
min max 5KP43 47.8 58.4 5.0 43.0 10.0 65.2 76.7 0.105 5KP43a 47.8 52.8 5.0 43.0 10.0 72.0 69.4 0.105 5KP45 50.0 61.1 5.0 45.0 10.0 62.3 80.3 0.106 5KP45a 50.0 55.3 5.0 45.0 10.0 68.8 72.7 0.106 5KP48 53.3 65.2 5.0 48.0 10.0 58.5 85.5 0.106 5KP48a 53.3 58.9 5.0 48.0 10.0 64.6 77.4 0.106 5KP51 56.1 69.3 5.0 51.0 10.0 54.9 91.1 0.107 5KP51a 56.7 62.7 5.0 51.0 10.0 60.7 82.4 0.107 5KP54 60.0 73.3 5.0 54.0 10.0 51.9 96.3 0.107 5KP54a 60.0 66.3 5.0 54.0 10.0 57.4 87.1 0.107 5KP58 64.4 78.7 5.0 58.0 10.0 48.5 103 0.107 5KP58a 64.4 71.2 5.0 58.0 10.0 53.4 94 0.107 5KP60 66.7 81.5 5.0 60.0 10.0 46.7 107 0.108 5KP60a 66.7 73.7 5.0 60.0 10.0 51.7 97 0.108 5KP64 71.1 96.9 5.0 64.0 10.0 43.9 114 0.108 5KP64a 71.1 78.6 5.0 64.0 10.0 48.5 103 0.108 5KP70 77.6 95.1 5.0 70.0 10.0 40.0 125 0.108 5KP70a 77.6 86.0 5.0 70.0 10.0 44.2 113 0.108 5KP75 83.3 102 5.0 75.0 10.0 37.3 134 0.108 5KP75a 83.3 92.1 5.0 75.0 10.0 41.3 121 0.108 5KP78 86.7 106.0 5.0 78.0 10.0 36.0 139 0.108 5KP78a 86.7 95.8 5.0 78.0 10.0 39.7 126 0.108 5KP85 94.4 115 5.0 85.0 10.0 33.1 151 0.108 5KP85a 94.4 104 5.0 85.0 10.0 36.5 137 0.108 5KP90 100 122 5.0 90.0 10.0 31.3 160 0.110 5KP90a 100 111 5.0 90.0 10.0 34.2 146 0.110 5KP100 111 136 5.0 100 10.0 27.9 179 0.110 5KP100a 111 123 5.0 100 10.0 30.9 162 0.110 5KP110 122 149 5.0 110 10.0 25.5 196 0.112 5KP110a 122 135 5.0 110 10.0 28.2 177 0.112 5KP120 133 161 5.0 120 10.0 23.6 212 0.112 5KP120a 133 147 5.0 120 10.0 26.0 193 0.112 5KP130 144 174 5.0 130 10.0 21.7 231 0.114 5KP130a 144 159 5.0 130 10.0 24.0 209 0.114 5KP150 167 203 5.0 150 10.0 18.6 269 0.114 5KP150a 167 185 5.0 150 10.0 20.6 243 0.114 5KP160 178 216 5.0 160 10.0 17.5 285 0.118 5KP160a 178 197 5.0 160 10.0 19.3 259 0.118 5KP170 189 229 5.0 170 10.0 16.5 303 0.118 5KP170a 189 209 5.0 170 10.0 18.2 275 0.118 5KP180 200 242 5.0 180 10.0 16.1 319 0.122 5KP180a 200 221 5.0 180 10.0 17.6 292 0.122 5KP190 211 255 5.0 190 10.0 8.8 341 0.126 5KP190a 211 233 5.0 190 10.0 9.7 310 0.126 5KP200 222 270 5.0 200 10.0 8.2 365.3 0.130 5KP200a 222 246 5.0 200 10.0 9.1 329.2 0.130 5KP210 233 283 5.0 210 10.0 7.7 390.0 0.134 5KP210a 233 258 5.0 210 10.0 8.6 349.5 0.134 5KP220 244 296 5.0 220 10.0 7.3 411.7 0.138 5KP220a 244 270 5.0 220 10.0 8.1 371.1 0.138 stand-off voltage v wm (v) maximum reverse leakge at v wm i d (a) maximum pead pulse i ppm (a) maximum clamping voltage at i ppm v c (v) maximum temperature coefficient of v (br) (%/ ??) electrical characteristics at(t a =25 ?? unless otherwise noted) table 1(cont' d) device type breakdown voltage v (br) (v) test current at i t (ma) document number 0285004 3. kisemiconductor
6.000 1000 10.000 10 1.0 10 100 measured at stand-off voltage, v wm 200 t j =25 f=1.0mh z vsig=50mvp-p measured at zerobias ratings and characteristic curves 5KP---series t l , lea d temperature, fi g. 2 -- pulse derati ng curve v(ba), breakdown voltage, v i ppm , peak pulse current, % (i ppm ) derating in percentage, % tol, pulse width, sec. fig.4 -- typical junction capacitance h hhhhhhhh h uni di recti onal peak pulse power (p pp ) or current ta, ambient temperature. t, time, ms fi g. 1 -- peak pulse power rati ng curve dissipation, w p ppm , peak pulse power, kw t, time, ms c j , junction capacitance, pf cj, junction capacitance, pf fig.3 -- pulse waveform fig.6 -- maximun non-repetitive forward hhhhhh h surge current unidirectional only pm(av), strady state power fig.5 -- steady state power derating curve 150 50 100 0 01.02.0 tr=10m s 3.0 4.0 peak value i ppm half value -i ppm 2 pules width (td) is definde as the point where the peak current decays to 50% of i ppm 10/1000m s waveform as definde by r.e.a. td ki semiconductor document number 0285004 4. 100 1.0 10 0.1 0.1 | s1.0 | s10 | s100 | s 1ms 10ms non-repetitive pulse waveform shown if fig.3 t a =25 100 75 25 50 0 025 75 50 125 100 150 200 175 1.00 0.75 0.25 0.50 0 025 75 50 200 100 125 150 175 l=0.375"(9.5mm) lead lengths 60 h z resistiveor inductive load 0.8 x 0.8 x .040" (20 x 20 x 1mm.) copper heat sinks 200 100 10 1100 10 t j =t j max. 8.3ms single half sine-mave (jedec method)
|
